Solar Pump
Solar Pump
- In commercial projects (10KW–100KW+), solar panels are interconnected using a dedicated copper or GI earthing wire.
- This ensures all module frames are electrically bonded and safely grounded.
- A continuous copper/GI wire (4 mm² or 6 mm²) runs across all panels.
- The wire is connected using nut-bolt or earthing clips/clamps at each module frame.
- The wire is finally linked to an earthing strip (GI 25×3 mm or 50×6 mm).
- The system is connected to 1 or more chemical earthing pits depending on the KW capacity.
Project Done
0
+
Customers
0
+
Award Winning
0
+
Rating Customer
0
+
Solar Pump Setup
Type | Size Range | Rated Voltage | Temp. Range | Standards |
AC Wire | 2.5–6 mm² | 1100V | –15°C to +85°C | IS 694, IEC 60227 |
DC Wire | 2.5–6 mm² | 1500V DC | –40°C to +120°C | EN50618, TUV, IEC 62930 |